E-Fab has decades of experience making Polarizers, Power Dividers, Antennas, Circuits, Archimedean and Logarithmic Spirals, using High Frequency Laminates. High frequency laminates are used due to their stable dissipation factor (Df) and the ability to allow less loss at higher frequencies on circuit boards.

We source a broad range of laminate materials, which we process to the unique specifications of our customers. Our laminate options and their typical applications include:

  • CuClad® 217/233/250

    • Airborne/ground-based RADAR systems
    • Automotive: Dedicated Short Range Communications (DSRC)
    • Base station antennas
    • Commercial and defense communication systems
    • Low Noise Amplifiers (LNA)
    • Lumped element filter designs
    • Radome and frequency selective surfaces (FSS)

    Note: CuClad 233 CTE value in-plane matches the aluminum used for aircraft structures.

    This product information has been provided by The Rogers Corporation.
  • IsoClad® 917/933

    • Airborne and ground-based RADAR systems
    • Conformal antennas for defense electronics
    • Multi-helical antennas for satellite communication (radio and telephony)
    • Radome and FSS


    This product information has been provided by The Rogers Corporation.
  • DiClad® Series
    • Airborne/ground-based RADAR systems
    • Antennas for commercial communication systems
    • Lumped element filter designs
    • Next generation communications systems


    This product information has been provided by The Rogers Corporation.
  • RO3000®

    • Automotive radar applications
    • Cellular telecommunications systems (power amplifiers and antennas)
    • Direct broadcast satellites
    • E-band point-to-point (P2P) microwave links
    • Global positioning satellite antennas
    • Patch antenna for wireless communications
    • Radio frequency identification (RFID) tags
    • Surface mount RF components


    This product information has been provided by The Rogers Corporation.
  • RO4000®

    • Automotive radar and sensors
    • Cellular base station antennas and power amplifiers
    • Low noise block (LNB) for direct broadcast satellites
    • Microwave P2P links
    • RFID tags


    This product information has been provided by The Rogers Corporation.
  • RT/duroid®

    • Airborne and ground-based radar systems
    • Military radar systems
    • Millimeter wave applications
    • Missile guidance systems
    • Space satellite transceivers


    This product information has been provided by The Rogers Corporation.
  • TMM® Laminates
    TMM® thermoset microwave laminates from Rogers Corporation possess mechanical and electrical stability, copper matched coefficient of thermal expansion, low thermal coefficient of dielectric constant, and dielectric constant uniformity. These features provide ultimate reliability in micro-strip and strip-line applications. TMM laminates offer key fabrication benefits over alumina substrates since they are available in larger, copper-clad formats, which facilitates the use of standard printed circuit board (PCB) subtractive processes.
    This product information has been provided by The Rogers Corporation.

Microwave & RF Laminates

  • Taconic Advanced Dielectric Division
    Fabricated from woven lightweight fiberglass, Taconic TLY laminates feature increased dimensional stability when compared to PTFE fiber-reinforced composites. The mechanical stability of this laminate makes it an ideal choice for high-volume production. A low dissipation factor supports antennas in millimeter wave frequencies and automotive radar equipment operating at 77 GHz.

Dupont Pyralux: High-Performance Flex and Rigid Flex Laminates

Isola Printed Circuit Materials: High-Performance Laminates

  • FR406 and 370HR
    • Aerospace
    • Automotive
    • Down-well drilling
    • High-speed computing
    • Lead-free assembly
    • Military
    • Sequential lamination
    • Telecommunications and network infrastructure


    This product information has been provided by Isola Group.

Contact E-Fab to Learn More about our Flex Capabilities

We are ISO certified for quality assurance and meet ITAR requirements. Since 1981, E-Fab has been photochemical machining metal parts and manufacturing flex circuits for OEMs in the electronics, medical, and aerospace industries. Our engineers are experienced in solving complex projects, and our product and quality teams have the expertise to get the job done quickly and to the highest quality standards.

Contact Us or Request a Quote today to learn more about our high-frequency laminate capabilities.